Image Fuser
3 steps to troubleshoot the image in the laser printer
Usually occurs at the most inopportune time, when printing a report very important. The impression begins to stains and the image quality is bad. There are problems of different quality of the image.
Banding · horizontal lines through the print job.
Stains · - An image continues to appear in a uniform sequence.
· Print Fades "The impression is clarified.
Stage 1 Visually inspect the printer and the toner cartridge.
Sometimes something can be inside the printer. The labels can get stuck in the cartridge and fuser. Wipe out the cavity of the printer with a dry cloth. Make sure nothing is inside the printer.
2 the step change the cartridge.
Many times the technicians have received a call from a client who had print quality. Usually the first question is, "Did you change the cartridge? "This is very important because nobody wants to pay a technician to appear on the site to change a toner cartridge. (Right?) Once you have determined the cartridge Toner was replaced. (I recommend that the person who oversees this step for witnesses changing cartridge.) Many times a technician showed up the site and ... Worldwide I thought someone changed the cartridge when in fact no one changed the toner cartridge.
½ 3rd step test page
What is a test page and a half? After inspection of the entire printer and toner cartridge is replaced. Put paper in the manual tray and do a test print. When the page is almost all the way into the printer to open the lid. This will tell if the problem happens before or after fuser fuser. If the image still is on the page before the fuser after steps 1 and 2 might be a transfer roller or the worst in a table. If the image is not in the page arrives prior to the fusing unit, then it could be a problem in the fuser. After completing these steps, it's time to make the service call to a service provider of their choice.
Action Printer Repair
George Thomas
Website: target = "_blank"> www.actionprinterrepair.com
About the Author:
Laser Printer Technician
Article Source: ArticlesBase.com - 3 Steps to Troubleshooting Image Problems on your Laser Printer
Image Fuser
Image Fuser
